NOTE: We've borrowed this concept from the the Ontario MG T Register website and others in the hope of offering a similiar service to our club members.

This page lists member recommended products or suppliers of parts and services. The aim is to develop a list of trusted suppliers primarily in Ontario and the Greater Toronto Area but extending to anywhere. The list is intended as a starting point for a reader seeking a source for some product or service.

To add a recommendation to the list, or to comment (pro or con), send an email to the Webmaster.

Wheel Balancing - On the Car
RNJ Tire Sales, 1600 Alliance Road, Unit 14, Pickering Ontario L1W 3V2.
Tel: 905-420-3686 Fax: 905-420-9534 1-800-963-3686 email: RNJ Tire Sales
Web site: www.rnjtires.com
Just had Paul Ross of RNJ Tires re-balance my tires to eliminate a steering wheel shudder at 50mph. Car now runs much smoother and straighter. Quite a knowledgable guy when it comes to tires. (Now I know the car will do at least 60 mph). Sandy Bates 30-Jun-2004

Rear Springs - Renew / Replace
Birchmount Auto Spring, 450 Birchmount Road, Toronto (Scarborough) Ontario M1K 1N8.
Tel: 416-698-3636 Fax: 416-6980-5732 email: Tony@BirchSpring
Web site: www.birchspring.com (still under development)
Like many, my '73 roadster suffered from tired rear springs and my general mechanic recommended I take it to Tony at Birchmount Auto Spring. 90 minutes later I drove away with the rear springs rebuilt (they added a 1/2 leaf as well). The car sits level and handles well and I'm very satisfied with the quick and very reasonably priced service. Jim Sweeney 18-Apr-2011

Collision Repair / Repainting / Undercoating
Reg's Auto Refinishing, 619 Danforth Rd. (at Kennedy), Toronto (Scarborough) Ontario M1K 1G1.
Tel: 416-261-5558
Recommended by Kurt Haderlein 10-May-2011

Complete engine builder and rebuilder for all makes and models
E.C.I Engines and Performance Machine Shop, 160 Wilkinson Road Unit #33, Brampton, Ontario L6T 4Z4.
Tel: 905-595-0659  (Contact: Emilio Costantini)
Web site: http://eci-engines.com
Emilio is knowledgeable and has done work across LBC marques. I delivered my engine essentially whole. He pulled it apart, inspected all parts, made recommendations for parts to be replaced due to wear. Block was fully cleaned (not dipped), square was checked. The block was bored 40 thou over, fast cam/lifters and high compression pistons installed. Engine was reassembled and tested on the bench, finishing paint applied. I handled all new parts ordering from various vendors. Work was completed on time and price was reasonable. Gary Bowman 11-Jan-2012